AUTHORIZED SUPERFORM ICF DEALER · IDAHO FALLS
SuperForm Insulated Concrete Forms
Reinforced concrete walls with continuous foam insulation on both sides, stacked like blocks and poured in place. S-Panels Idaho now supplies the complete SuperForm ICF package for basements, foundations, homes, shops, and commercial buildings.
Concrete Strength. Foam Insulation. One Wall.
An ICF wall replaces forming, framing, insulation, vapor barrier, and furring with one system. The foam stays in place as insulation, the concrete core carries the load, and built-in furring strips take siding and drywall screws. Pair it with an S-Panels SIP roof, and you have a complete high-performance shell from one Idaho supplier.
Why We Chose Superform
12" Block
Flatter, straighter walls
A 4' x 1' block (most brands are 16"-18" tall) means more ties per square foot and less bulging during the pour. It also matches 1-foot plan dimensions, so estimating and stacking are simple.
Ties Every 6"
8 ties per block, 850+ lb each
Full-height virgin polypropylene ties every 6" on center give 25% more attachment points than 8" systems. SuperForm reports that a single 2" screw holds up to 330 lb.
Fewer Extras
No zip ties, glue, or kickers
Interlocking knobs and grooved, anti-lift panels lock each course. The block sits flat on the footing, and 1" cut lines keep cuts square, so crews stack faster with less waste.
Performance You Can Feel
R23-R25
Continuous EPS insulation, inside and out. Add a Super R+ insert for +R8 or +R16.
Up to 4 HR
Fire-resistance rating, depending on wall assembly and finishes.*
STC 50+
Sound transmission class. Traffic, neighbors and shop noise stay outside.*
250 Mph
Wind and flying-debris resistance of a reinforced concrete wall.*
* As reported by SuperForm from product testing (fire per ASTM E119). Actual performance depends on design, reinforcement, finishes, and installation. SuperForm reports up to 60% lower heating and cooling costs than conventional walls; savings vary by climate and design.

The Complete ICF Package, From One Supplier
We take off your plans and supply everything the wall needs, delivered together:
- SuperForm standard, corner, 45°, T, brick-ledge and top blocks in 4", 6", 6-1/2", 8" and 10" cores
- Gorilla Buck insulated window and door bucks, end bucks and buck braces
- MST-BAR fiberglass rebar (or steel), corner bars and lintel bars
- Hilltop wall bracing and scaffolding, for rent or purchase
- Soprema waterproofing, drainage board, ICF screws, spray foam, ledger connectors and anchors
Your contractor provides concrete, footings, and placement. We include the concrete yardage on every estimate so you can order it.
Explore ICF with S-Panels
How an ICF Estimate Works
1
Floor plan, elevations, and foundation plan, or a sketch with wall lengths and heights.
2
Blocks by type, corners, bucks, rebar, bracing and waterproofing, plus your concrete yardage.
3
Line-item pricing with marked-up plans showing every wall we counted.
4
One coordinated delivery, timed to your footing pour.
Planning an ICF build in Idaho or the Mountain West?
Talk to Chuck Pfeiffer, Sales Manager. Monday-Friday, 8:00 am-5:00 pm.
S-Panels Idaho · Idaho Falls, ID · (208) 552-1700
SuperForm® is a trademark of SuperForm Products. S-Panels Idaho is an authorized SuperForm dealer. Project photos courtesy of SuperForm Products.








